Rp5 gm11: PAC RP5-GM11 Wiring Interface Connect a new car stereo and retain OnStar®, factory amp, and steering wheel audio controls in select 2000-14 GM vehicles at Crutchfield

User manual PAC RP5-GM11 (English

Radio Replacement & Steering Wheel Control Interface with OnStar Retention for General Motors Vehicles

RP5-GM11

PAC-audio.com

P ifi A C ti

Page 1

Rev: 5

Date: 050918

Introduction and FeaturesImportant NotesWiring Connection ChartIllustration / Schematic

The RP5-GM11 interface allows the replacement of a factory radio in select General Motors vehicles with Class II radios.

Using this interface will retain factory features such as OnStar, steering wheel controls (SWC), warning chimes, Rear

6HDW&RQWUROV56&5HDU6HDW(QWHUWDLQPHQW56(DQGWKH%26(DPSOL¿HUZKHQWKHRULJLQDOUDGLRLVUHPRYHG7KH

RP5-GM11 also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed signal (VSS), illumination, reverse trigger and parking brake.

1. These instructions only apply to R.2.2.6.13 or later revisions. The revision info can be found on a small white sticker on the

interface and packaging.

2. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the

interface into the vehicle (see next page for setting chart).

3. The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require programming unless

you wish to re-assign the SWC functions to different buttons. The SWC can always be restored to default settings by pressing

DQGUHOHDVLQJWKHSURJUDPEXWWRQRQWKHVLGHRIWKHLQWHUIDFHRQFHDQGZDLWLQJVHFRQGVIRUWKH/(‘WRÀDVKWLPHVPLEASE

127(’XHWRWKHPDQ\GLIIHUHQWSRVVLEOH2(06:&FRQ¿JXUDWLRQVVRPHDSSOLFDWLRQVPD\QHHGWREHUHSURJUDPPHGfor the SWC assignments to make sense. Whatever you assign as aftermarket volume commands will also be the OnStar volume commands.

4. The aftermarket radio must have an auxiliary input in order for the factory RSE audio to be retained through the cabin speakers.

5. RSC buttons that are identical to the SWC will mimic the SWC one for one.6. 7KH/(‘ZLOOÀDVKZKHQHYHUD6:&EXWWRQLVSUHVVHG

SWC Connection

See above chart for

different radio type

connections

WiringSWC Connection

Power and Speaker

Connections

Rear Seat Entertainment

Audio Retention Harness

Aftermarket

Radio

Connections

Vehicle

Connections

Light Green Parking Brake Output (-)

Pink Vehicle Speed Output

Blue Not Used

Blue / White Factory Amp Turn On

Input (required for Bose

systems)

Orange / White Illumination Output (+)

Purple / White Reverse Output (+)

Brown Loop

Mute Loop – See

installation note 6.

Aftermarket Radio Connections

Yellow * +12v from RP5

Yellow * +12v from vehicle

Black ** Ground from RP5

Black ** Ground from vehicle

Red Acc. Output

White Front Left + input

White / Black Front Left – input

Grey Front Right + input

Grey / Black Front Right – input

Green Rear Left + input

Green / Black Rear Left – input

Purple Rear Right + input

Purple / Black Rear Right – input

SWC Connector

Blue / Yellow Kenwood, Newer JVC

3. 5mm Jack

Alpine, JVC, Clarion, Fusion, Pioneer, Sony, Dual, Axxera, Lightning Audio, Jensen, Rockford Fosgate

IMPORTANT NOTES REGARDING YELLOW AND BLACK WIRE CONNECTIONS

* Connect both Yellow wires from the

RP5 harnesses to the radio’s 12v

constant input.

** Connect both Black wires from the

RP5 harnesses to the radio’s ground

input.

F====t=======1

F=====+=======1…..__

___j___

___

F====l======J

r—-+—_J

F====t======~

…..__

____l_

___

Connects2 – Vehicle Integration

RP5-GM11

Headunit connection lead

Manufacturer	ProductNo
Clarion	CTCLARIONLEAD
JVC	CTJVC2LEAD
Kenwood	CTKENWOODLEAD
Kenwood	CTKENWOODLEAD2
Pioneer	CTPIONEERLEAD
Pioneer	CTPIONEERLEAD. 2
Sony	CTSONYLEAD
Connects2	CTMULTILEAD.2
Connects2	CTMULTILEAD.2-L
Connects2	CTMULTILEAD.5
Connects2	CTSMARTLEAD
Grundig	CTGRUNDIGLEAD
Stinger	CTSTINGERLEAD

Description

Vehicle Applications

Downloads

RP5-GM11

An all-in-one radio replacement and SWC interface, the innovative RadioPRO5 comes pre-loaded with OnStar retention, amplifier retention, SWC software, navigation-based output signals, and other features that save time and money during installation.