Removing oven door ge: GE Appliances Support & Troubleshooting Guides by Product Category

GE Oven Door Locked After Self Clean

GE is one of the largest companies in the world. One of their core businesses is to manufacture high-quality home appliances, such as ovens.

Many models of GE ovens include a self-cleaning function that, as the name suggests, automatically cleans a consumer’s oven without them having to do any work.

However, sometimes after the cleaning cycle is completed, the oven will not unlock (it locks during cleaning), and it can be hard for the average consumer to solve the problem.

There are a couple of ways to get your oven unlocked, which we have outlined below.

This guide covers the following GE oven models that have a self-cleaning function:

P2B940SEJSS

JD630SFSS

JM250DFBB

JM250DFWW

JD630DFBB

JS645ELES

JS645FLDS

JS645DLWW

JS645SLSS

PGB935BPTS

PGB935YPFS

JB480SMSS

JGB660FPDS

JGB660EPES

JGB660YPFS

JGB450DEKWW

JB655FKDS

JB655EKES

JB480DMBB

JGB660SPSS

JB480DMWW

JB655YKFS

JGB645SEKSS

JGB660DPWW

JGB660DPBB

JB645FKDS

JB645EKES

JB655SKSS

JGB635REKSS

JB655DKBB

JB655DKWW

JB645RKSS

JB625RKSS

JGB635DEKBB

JGB635DEKWW

JB645DKBB

JB625DKWW

JB645DKWW

JB625DKBB

JB258RMSS

JB256RMSS

JB258DMCC

JB258DMBB

JB258DMWW

JB256DMBB

JB256DMWW

Reset the Computer

The first method is to reset the oven’s computer. You can do that by following these steps:

Step1 – Reset the circuit breaker

The first thing you need to do is reset the circuit breaker. The circuit breaker that powers your oven is probably located in your garage or outside your house.
Once found, turn it off for five minutes. If you’re not sure which switch powers your oven/kitchen, a good tip is to leave the kitchen lights on and test each switch until you find the one that turns the kitchen lights off.
After five minutes, turn the switch back on.
Your oven should now be displaying a blinking “12:00.”
Now that you have reset the circuit breaker, you should check if the oven has unlocked or not. If it is not unlocked, move to step 2.

Step 2 – Test the cleaning setting

The first thing you need to do is press the self-cleaning button for 30 seconds and then let go. Now check if the door will open. If it still won’t open, move on to the next step. Keep in mind that the oven needs to be cool before a cleaning cycle will start – so if the oven is hot or warm, let it cool down before trying this step.

Step 3 – Set a new cycle

The next step is to program your oven to run a short self-cleaning cycle (1 to 2 hours) and then let the cleaning cycle run.
Once finished, let the oven cool down completely, and then try to open the oven door. Before moving on to the next step, you should wait for 1 to 3 hours to ensure that it has cooled down. If you have no luck opening the door, move on to step 4.

Step 4 – Cut the power

The final step if you still haven’t fixed the problem is to cut the power.
You can do this by switching off the circuit breaker that powers the oven again. You can then test if the door opens or not.
If not, move the oven out from the wall or cabinet it is in, and unplug the power from the wall. You’ll need to keep it unplugged to run through the second method of unlocking the oven.

Unlock the Oven Manually

If trying to unlock the oven door by resetting the computer fails, the second method is to unlock your GE oven manually. Here’s how to do it:

Step 1 – Let the oven cool down

Before doing anything, give your oven an hour or so after the self-cleaning cycle has ended so that it can properly cool down. This is because the oven will be too hot to work with until it has cooled down completely.

Step 2 – Cut the power

Once it has cooled down, you can cut the power to the oven by turning the circuit breaker switch off or by making sure it has been turned off at the wall and the power cord pulled out.

Step 3 – Flip the latch

For some models of GE ovens, you can flip the door lock latch by using a wire hook to unlock it. You can make a wire hook by getting a wire hanger and making a small hook at one end of it.
Take your wire hook, place it between the oven door and the rest of the oven, place it over the latch, and pull it (the latch is usually in the top center of the oven door). This should release the lock, and you’ll be able to open the oven door. Just be careful to do it very gently so you don’t scratch the oven or cause any damage. This should get the oven door open, but you may need to consult a technician to get them to reset the latch.
For some GE oven models, you will be able to release the latch by accessing the lock from the back of the oven or from the side of it underneath the stovetop. If this applies to your oven, pull your oven out from the wall and remove the back panel or stovetop. You can then unscrew the screws that are holding the door lock assembly in place and then release the door latching rod by pulling it down. You can then push the locking rod forward to release the door lock. You should also contact a technician to come and check it out, as if it has failed once, it will likely fail again and should be replaced.

Sharing

How to Remove and Re-install an Oven Door

Papin Lab / Shutterstock.com

You are ready to prepare your favourite meal in the oven but the door won’t close properly? Or do you want to clean your cooking appliance in-depth but the door keeps getting in your way? We know how frustrating this can be! But don’t worry, an oven door can be easily removed, disassembled to its parts and repaired, or fully replaced. Depending on the oven model you have, the steps may slightly differ, but the main is always the same.

So, if you:

Are suspecting that your oven door is in need of repair;
Want to know how to properly disassemble your oven door;
Want to deep clean your oven but you don’t know how to remove the door;

Then, keep reading because this article is just for you! Here, you will find the signs that your oven door needs repair, as well as a step-by-step guide on how to remove and re-install an oven door.

Table of contents:

When is oven door removal necessary?
How to remove the oven door
How to put an oven door back on
Takeaways

When is oven door removal necessary?

In most cases, homeowners resort to removing the oven door when either they’ve decided to deep clean the oven, the door glass is cracked or the door fails to close properly.

Several reasons can lead to improper closing of the oven door. From a faulty hinge to a worn-out seal, the result is always the same – heat escaping through the gaps and an unevenly cooked meal.

Now, let’s have a look at some common reasons behind an oven door replacement in more detail.

There’s a damaged oven door hinge

A damaged oven door hinge is one of the most common reasons why an oven door won’t close firmly. Hinges can come off their slots if the door is pulled rather forcefully, loosen or break with time and frequent use, or get stuck with grease and food debris.

You will be able to tell the issue is coming from the hinges when you see your door hanging slightly to one side or you inspect the hinges up close and notice that they don’t move smoothly. Luckily, repairing an oven door hinge is a simple task!

Oven seal needs replacement

Oven seals, also known as gaskets, are designed to withstand extreme heat, but they are still prone to wear and tear. With everyday use, gaskets can wear out or even break.

To see if that is the case with your oven door seal, simply run your hand along the lengths of the door frame from a short distance, while the cooking appliance is turned on. Just be careful to not get burned! If you can feel a stream of hot air, then the oven door seal has loosened and come off.

Damaged or broken oven door glass

Whether your oven door glass has not withstood the test of time or you have accidentally bumped into it, addressing cracks in the oven door is something that shouldn’t be put off for long because it can only get worse.

Whatever the reason, even if the crack is a particularly small one and barely visible, a damaged oven door glass may pose a health hazard when exposed to very high temperatures, corrupt the cooking process, or drastically reduce the energy efficiency.

Oven door requires deep cleaning

As a general rule of thumb, ovens should be cleaned in-depth every 6 months. Although an oven door can be cleaned without actually being removed, to make it easier for you and to achieve better results, we recommend disassembling the door, if the model allows it, of course. That way, you will be able to reach the internal parts of the cooking appliance better and clean the oven door both inside and out.

Think your oven can benefit from a professional’s touch?

Resort to the help of experienced cleaners now and save time!

We’re certified:

How to remove the oven door

Removing an oven door does not require a great deal of effort. The approach may vary from model to model, but in most cases, ovens operate in a very similar way. If you own one of the newer oven models, the door will probably be attached to the main body with the help of a locking mechanism using latches. However, the older models usually come without latches.

To help you handle the task smoothly, below we’ve put together the most important information on how to remove an oven door with and without hinges in two simple step-by-step guides.

Before diving into work, however, make sure your cooking appliance is turned off and cool. Wipe the door with a clean cloth and some detergent to remove the main dirt and grease. Also, you may want to prepare a pair of safety gloves, a soft towel to put the door on once it’s removed, as well as a flat screwdriver and a Phillips one.

If your appliance shows signs of malfunction or there is a visible damage, then your oven may require a more complicated electrical or other sort of repair. According to Australian law, unless you are a licensed technician, you are not allowed to conduct any electrical repair at home. Avoid the risk of operating or attempting any sort of DIY repair on a a faulty oven and play it safe by hiring a professional technician who will both inspect and fix all oven door issues at once.

Removing an oven door with hinge latches/screws

As we have already established, not all ovens are built the same. If your oven door comes with latches or screws, you will be able to tell by looking at the hinges’ locking mechanism, when the door is in an open position.

If that is your case, check the steps below on how to remove an oven door with hinge latches and screws:

Step 1. Open the oven door fully so that it is parallel to the floor. This will help expose the metal latches and give you better access.

Step 2. Once you have located the latches at both sides of the door, flip them open, using either a flat screwdriver or your fingers. If instead of latches, you see one or two screws at each hinge, use a screwdriver or nut driver to unscrew the door hinges from the oven frame.

Step 3. Start closing the door and stop when it is only a quarter ajar. For some models, you will need to stop when it’s ⅓ of the way open.

Step 4. To detach the door, grab both sides evenly, then gently pull the door up and away. The door hinges should easily slide out from the oven’s frame.

Depending on the model, the latches can look and operate slightly differently. Check your manufacturer’s instructions prior to beginning work, just to stay on the safe side.

How to remove an oven door without hinge latches

If you’ve inspected your oven and you haven’t found latches, don’t think that your oven door has been less secured or that it will be more difficult to remove it. In fact, it may even prove easier!

Here are the steps to follow on how to remove an oven door without hinge latches:

Step 1. Open the oven door, so it’s partially ajar, approximately a quarter of the way down. Most doors can stay still at this position.

Step 2. Move your hands to grab the door at both sides. Keep a firm grasp of the door because it can be heavy.

Step 3. Remove the door from the main body of the oven by lifting it gently away. The hinges should slide free easily and quickly. Once the door has been disassembled, place it on a flat, safe surface.

Don’t try to lift the oven door by the handle because this may cause damage.

How to put an oven door back on

Whether you are returning an old oven door back in its place or you are fitting a brand new one, you will see that the steps are just the same. The only part that may be a bit frustrating is when you try to align the hinges to the dedicated slots and fit them perfectly in their place. Just arm yourself with some patience.

Alright then, here come the steps on how to put an oven door back on:

Step 1. Grabbing the oven door by the sides, align it with the oven’s slots. This means that you will need to hold the door at the same angle it was when you removed it. Make sure you are holding it firmly.

Step 2. Slide the two hinge tongues into the oven’s slots simultaneously and push as far as possible until you can feel that the hinges have set in the slots perfectly.

Step 3. Push the door corners slightly down, then open the door fully. If the hinges were fit correctly, the door should come down without difficulty. If the door looks uneven or opens only partially, slide it out and try fitting it again.

Step 4. Lock the hinge latches, if your door has them, or place the screws back in. Finally, close the door and see if it looks even and moves up and down seamlessly.

As you have already seen, re-installing an oven door is just as easy as removing it. However, if you don’t feel up to the job, again you can consider requesting a professional oven repair service.

While removing and re-installing an oven door can be fairly simple, you may want to consider asking a friend to help you with the lifting and aligning, as oven doors can be quite heavy.

Takeaways

Oven door removal may prove necessary when you want to deep clean the appliance, fix a faulty element or replace a damaged glass panel.
There are two main types of hinge locking mechanisms – some doors come with hinge latches, while others are latchless.
Removing and re-installing an oven door is a fairly simple task if you have the tools and you know the steps.
However, some oven repair tasks can prove to be more complicated and then, contacting a professional oven technician would be the better solution.

Disclaimer: We are a commercial home maintenance service provider. Our purpose with this blog is to provide valuable and accurate content for solely informational purposes. We strongly advise our readers to consider all the risks and health concerns before taking a DIY project. We also highly recommend you get fully informed about the laws and regulations regarding electrical, plumbing, appliance repair and other work in the different states of Australia.

Have you ever had to re-install your oven door? Did you use any tricks you would like to share with us? Feel free to put them in the comments below!

Enjoyed this article? Share with your friends!

How to remove the GE oven door?

To remove the GE oven door, turn off the oven and turn on the electricity or gas. If the door is hot, use gloves to remove it.

Open the oven door to the frying position and grasp it on each side. Slowly pull the door up to release it from the hinges. If the oven is self-cleaning, the door may be held with a clip; use a screwdriver to remove the screw and the bracket holding it in place. Keep pulling up the door for complete removal. In some cases, it is necessary to pry off the loops.

Spare parts for Gefest oven

Home
» Spare parts » For oven

Sort by:

Power – 1200 W

Pickup: Minsk, Partizansky pr. 18a

30 BYN

Power – 2000 W

Pickup: Minsk, Partizansky pr. 18a

30 BYN

Outer coil power – 800 W

Grill power – 1200 W

Pickup: Minsk, Partizansky pr. 18a

Out of stock

Power – 600 W

Pickup: Minsk, Partizansky pr. 18a

Out of stock

Outer coil power – 800 W

Grill power – 1200 W

Pickup: Minsk, Partizansky pr. 18a

30 BYN

18 liter oven

Size: 320 x 250 mm

Pickup: Minsk, Partizansky pr. 18a

11 BYN

42 liter oven

Size: 385 x 320 mm

Pickup: Minsk, Partizansky pr. 18a

21.6 BYN

52 liter oven

Size: 390 x 358 mm

Pickup: Minsk, Partizansky pr. 18a

22.98 BYN

Out of stock
63 liter oven

Size: 460 x 420 mm

Pickup: Minsk, Partizansky pr. 18a

20.5 BYN

42 liter oven

Size: 375 x 350 mm

Pickup: Minsk, Partizansky pr. 18a

19.98 BYN

52 liter oven

Size: 435 x 365 mm

Pickup: Minsk, Partizansky pr. 18a

Out of stock

22.86 BYN

18 liter oven

Size: 375 x 250 mm

Pickup: Minsk, Partizansky pr. 18a

Out of stock

63 liter oven

Size: 460 x 420 mm

Pickup: Minsk, Partizansky pr. 18a

24.5 BYN

42 liter oven

Size: 375 x 350 mm

Pickup: Minsk, Partizansky pr. 18a

21.1 BYN

52 liter oven

Size: 435 x 365 mm

Pickup: Minsk, Partizansky pr. 18a

25.32 BYN

15 BYN

Convection motor with impeller

Pickup. Minsk, Partizansky Ave. 18a

42.9 BYN

Rotisserie drive

Pickup. Minsk, Partizansky Ave. 18a

25.1 BYN

Tangential fan for ovens 602, 622

Pickup. Minsk, Partizansky Ave. 18a

Out of stock

Contact device for illumination.

Used in illuminated floor tiles

Pickup: Minsk, Partizansky pr. 18a

4.5 BYN

Bracket for fastening the door of households. drawer

Pickup. Minsk, Partizansky Ave. 18a

BYN

Oven lamp

15 Watt, t = 300℃

Pickup. Minsk, Partizansky Ave. 18a

4.02 BYN

Easily removable wire oven guides

Pickup. Minsk, Partizansky Ave. 18a

14 BYN

Oven temperature indicator

Used on models 3200, 1200

Pickup. Minsk, Partizansky Ave. 18a

BYN 7

Oven backlight.

Pickup. Minsk, Partizansky Ave. 18a

9.12 BYN

52 liter oven spit

Pickup. Minsk, Partizansky Ave. 18a

25.02 BYN

Barbecue Disc

Pickup. Minsk, Partizansky Ave. 18a

4 BYN

Skewer for barbecue

Pickup. Minsk, Partizansky Ave. 18a

3 BYN

Pushbutton and contact light housing for plates 3200, 1200

Pickup. Minsk, Partizansky Ave. 18a

3.6 BYN

DUT button for plates 3200, 3100, 1200, 1100

Pickup. Minsk, Partizansky Ave. 18a

1.8 BYN

18 liter oven

Size: 420(w) x 235(h) mm

Applies to models: 100, 120, 420

Pickup: Minsk, Partizansky pr. 18a

16.8 BYN

65 liter oven

Size: 430(w) x 340(h) mm

Applies to models: 102, 122, 1140

Pickup: Minsk, Partizansky pr. 18a

BYN 20

42 liter oven

Size: 350(w) x 300(h) mm

Applies to models: 2140, 2160

Pickup: Minsk, Partizansky pr. 18a

15 BYN

65 liter oven

Size: 480(w) x 260(h) mm

Applies to models: 1100

Pickup: Minsk, Partizansky pr. 18a

BYN 15

44 liter oven

Size: 390(w) x 260(h) mm

Applies to models: 300, 2040, 3100

Pickup: Minsk, Partizansky pr. 18a

15 BYN

63 liter oven

Size: 420(w) x 400(h) mm

Applies to models: 1200, 1300, 1500

Pickup: Minsk, Partizansky pr. 18a

15 BYN

43 liter oven

Size: 350(w) x 315(h) mm

Applies to models: 3200, 3300, 3500

Pickup: Minsk, Partizansky pr. 18a

15 BYN

52 liter oven

Size: 470(w) x 365(h) mm

Applies to: 6100, 6300, 6500, 5100, 5300, 5500, 602, 622, 5140, 5560, 6140, 6560, 5102, 5502, 6102, 6502 90 054

Pickup: Minsk, Partizansky pr. 18a

22.5 BYN

Swan

Pickup: Minsk, Partizansky pr. 18a

21.35 BYN

Oven door hinge rubber stop

Fixed between panoramic glass with oven door hinge

Pickup. Minsk, Partizansky Ave. 18a

0.5 BYN

Used in 60 cm wide slab

and built-in ovens

Pickup: Minsk, Partizansky pr. 18a

15.24 BYN

Tempered oven door inner glass

Size: 400 x 435.5 mm

Applies to models: 3200

3100 after 2011

5100 before 10/2015

Pickup: Minsk, Partizansky pr. 18a

BYN 20

Tempered inner glass oven door

Size: 440 x 285 mm

Used in models: 1457, 1100

Pickup: Minsk, Partizansky pr. 18a

15 BYN

Tempered oven door inner glass

Size: 485 x 435 mm

Applies to models: 1300, 1500, 1502, 1200, 6100,

6300, 6500, 6102, 6502, 1140, 6140, 6560 before 2019

Pickup: Minsk, Partizansky pr. 18a

25.02 BYN

Tempered oven door inner glass

Size: 370 x 260 mm

Applies to models: 300

3100 before 2011

Pickup: Minsk, Partizansky pr. 18a

15 BYN

Tempered oven door inner glass

Size: 457 x 377 mm

Applies to models: 5100, 5300, 5500, 5102,

5502, 5560, 5140 after 10/2015

Pickup: Minsk, Partizansky pr. 18a

BYN 23

Tempered oven door inner glass

Size: 485 x 390 mm

Applies to models: 1200, 6100, 6300, 6500,

6102, 6502, 6140, 6560 after 2019

Pickup: Minsk, Partizansky pr. 18a

BYN 25

Oven door inner glass clamp

Used to fix the inner glass at the bottom of the oven door

Pickup. Minsk, Partizansky Ave. 18a

1 BYN

Rubber stop for the outer glass of the oven door

Fixed between the panoramic glass and the metal body of the door on the top and sides

Pickup. Minsk, Partizansky Ave. 18a

0.48 BYN

Oven door handle (mortise)

Colour: black

Applies to models:

5100, 5300, 5500, 6100, 6300, 6500

Pickup: Minsk, Partizansky pr. 18a

21.1 BYN

Oven door handle (mortise)

Colour: white

Mount distance: 46 cm

Applies to models:

1200 С-С6 issued after 10.2012

Pickup: Minsk, Partizansky pr. 18a

16.65 BYN

Oven door handle (mortise)

Colour: brown

Mount distance: 46 cm

Applies to models:

1200 C-C6 after 10.2012

Pickup: Minsk, Partizansky pr. 18a

17.7 BYN

Oven door handle (straight)

Colour: white

Applies to models:

– 1100

– 1200 С5-С7 issued before 10. 2012

Pickup: Minsk, Partizansky pr. 18a

26.85 BYN

Oven door handle (straight)

Colour: brown

Applies to models:

– 1100

– 1200 С5-С7 issued before 10.2012

Pickup: Minsk, Partizansky pr. 18a

16.85 BYN

Oven door handle (mortise)

Colour: white

Mount spacing: 52.5 cm

Applies to models:

1200 C7 after 10.2012

YES 102, YES 122

Pickup: Minsk, Partizansky pr. 18a

21.28 BYN

Oven door handle (mortise)

Colour: brown

Mount spacing: 52. 5 cm

Applies to models:

1200 C7 after 10.2012

YES 102, YES 122

Pickup: Minsk, Partizansky pr. 18a

23.52 BYN

Oven door handle (mortise)

Applies to models:

– 3100-(00-04) after 02.2007

– 3200-(00-04)

– 3200-(05-08) release after 09.2017

Pickup: Minsk, Partizansky pr. 18a

13.2 BYN

Oven door handle (mortise)

Applies to models:

– 3200-(K60, K61, K62, K63)

– 3200-06 K62

Pickup: Minsk, Partizansky pr. 18a

BYN 25

Oven door handle (straight)

Applies to models:

– 3100 after 2011

– 3200-(05-08) issued before 09. 2017

Pickup: Minsk, Partizansky pr. 18a

25.92 BYN

Oven door handle (straight)

Colour: black

Applies to models:

– 3100 after 2011

– 3200-(05-08) issued before 09.2017

Pickup: Minsk, Partizansky pr. 18a

26.5 BYN

Oven door handle (straight)

Colour: brown

Applies to models:

– 3100 after 2011

– 3200-(05-08) issue before 09.2017

Pickup: Minsk, Partizansky pr. 18a

26.82 BYN

Oven door handle (mortise)

Colour: white

Applies to models:

5100, 5300, 5500, 6100, 6300, 6500

Pickup: Minsk, Partizansky pr. 18a

21.1 BYN

BYN 22

Oven door handle (mortise)

Colour: brown

Applies to models:

5100, 5300, 5500, 6100, 6300, 6500

Pickup: Minsk, Partizansky pr. 18a

21.2 BYN

Handle stand for stove 3100, 300

Pickup. Minsk, Partizansky Ave. 18a

4.92 BYN

Handle stand for stove 3100, 300

Pickup. Minsk, Partizansky Ave. 18a

4.92 BYN

Tempered panorama oven door glass

Size (WxH): 598 x 442 mm

Distance between handle holes: 524 mm

Applies to models: 1200 CK62

Pickup: Minsk, Partizansky pr. 18a

Out of stock

Tempered panorama oven door glass

Size (WxH): 598 x 448 mm

Distance between handle holes: 424 mm

Used on models: 6100, 6102, 6140 (white)

Pickup: Minsk, Partizansky pr. 18a

48 BYN

Tempered panorama oven door glass

Size (WxH): 598 x 448 mm

Distance between handle holes: 424 mm

Used on models: 6100, 6102, 6140 (brown)

Pickup: Minsk, Partizansky pr. 18a

50 BYN

Tempered panoramic glass oven door

Size (WxH): 498 x 442 mm

Distance between handle holes: 424 mm

Applies to models:

3200 (05-08) release after 09/01/2017

Pickup: Minsk, Partizansky pr. 18a

46.56 BYN

Tempered panorama oven door glass

Size (WxH): 500 x 450 mm

Distance between handle holes: 424 mm

Applies to models: 5300-02 0040, 5300-03 0040,

5500-03 0042, 5502-02 0042, 5502-03 0042

Pickup: Minsk, Partizansky pr. 18a

Out of stock

Tempered panorama oven door glass

Dimensions (WxH): 500 x 450 mm

Distance between handle holes: 424 mm

Used on models: 5100, 5102, 5140 (white)

Pickup: Minsk, Partizansky pr. 18a

49.74 BYN

Tempered panorama oven door glass

Dimensions (WxH): 500 x 450 mm

Distance between handle holes: 424 mm

Applies to models: 5100-02 0009

Pickup: Minsk, Partizansky pr. 18a

44.64 BYN

Tempered panorama oven door glass

Size (WxH): 498 x 409 mm

Applies to models:

3200 (05-08) release until 09/01/2017

3100 after 2007

Pickup: Minsk, Partizansky pr. 18a

37.8 BYN

Tempered panorama oven door glass

Size (WxH): 498 x 442 mm

Distance between handle holes: 424 mm

Applies to models: 3200 (00-04), 2140

Pickup: Minsk, Partizansky pr. 18a

51.3 BYN

Tempered panorama oven door glass

Size (WxH): 598 x 415 mm

Applies to models: 1100

Pickup: Minsk, Partizansky pr.